Watts

Foodservice Products

Home
Available exclusively from Dormont Manufacturing

Replacement Filters

Many Hydro-Safe replacement filters are certified by WQA to NSF/ANSI standards to ensure quality, consistency, and superior performance. To ensure the quality, integrity and warranty of your Hydro-Safe product, use only Watts replacement filters and components.

Sediment Filters

Photograph of HS-FIL-SED-STD-10-1M
Model Number:
HS-FIL-SED-STD-10-1M
Ordering Code:
HSR-S-SED-1M

HS-FIL-SED-STD-10-1M

The 10-inch 1-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 10 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-10-1M-PL
Model Number:
HS-FIL-SED-STD-10-1M-PL
Ordering Code:
HSR-S-SED-1MP

HS-FIL-SED-STD-10-1M-PL

The 10-inch 1-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-10-10M
Model Number:
HS-FIL-SED-STD-10-10M
Ordering Code:
HSR-S-SED-10M

HS-FIL-SED-STD-10-10M

The 10-inch 10-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. Is is a high quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 10 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SD-STD-10-20M-GR
Model Number:
HS-FIL-SD-STD-10-20M-GR
Ordering Code:
HSR-S-SED-20MG

HS-FIL-SD-STD-10-20M-GR

The 10-inch 20-micron grooved polypropylene sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housings to reduce capital equipment costs. Contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other standard sediment filters. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C)

  • Grooved polypropylene filter for expanded filter capacity
  • 20 Microns filtration rating
  • Melt blown polypropylene
  • Fits all standard 10 inch housings
Photograph of HS-FIL-SD-STD-10-20M-PL
Model Number:
HS-FIL-SD-STD-10-20M-PL
Ordering Code:
HSR-S-SED-20MP

HS-FIL-SD-STD-10-20M-PL

The 10-inch 20-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-10-5M
Model Number:
HS-FIL-SED-STD-10-5M
Ordering Code:
HSR-S-SED-5M

HS-FIL-SED-STD-10-5M

The 10-inch 5-micron sediment depth cartridge is made of a melt-blown polypropylene material that gives it excellent chemical resistance with no media migration. It is a premium-quality, food-grade cartridge for food and beverage applications with a high dirt-holding capacity. It is excellent for applications involving potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing and plating solutions. The operating temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C) and the maximum water pressure is 40 PSI.

  • 10 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-10-5M-GR
Model Number:
HS-FIL-SED-STD-10-5M-GR
Ordering Code:
HSR-S-SED-5MG

HS-FIL-SED-STD-10-5M-GR

The 10-inch 5-micron grooved polypropylene sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. Contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other standard sediment filters. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The operating temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C)

  • Grooved polypropylene filter for expanded filter capacity
  • 5 Microns filtration rating
  • Melt blown polypropylene
  • Fits all standard 10 inch housings
Photograph of HS-FIL-SED-STD-10-50M
Model Number:
HS-FIL-SED-STD-10-50M
Ordering Code:
HSR-S-SED-50M

HS-FIL-SED-STD-10-50M

The 10-inch 50-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. It is a premium-quality, food-grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 10 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SD-STD-10-50M-PL
Model Number:
HS-FIL-SD-STD-10-50M-PL
Ordering Code:
HSR-S-SED-50MP

HS-FIL-SD-STD-10-50M-PL

The 10-inch 50-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The operating temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C) and the maximum water pressure is 40 PSI.

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-1M-PLT
Model Number:
HS-FIL-SED-BB-10-1M-PLT
Ordering Code:
HSR-BS-SED-1MP

HS-FIL-SED-BB-10-1M-PLT

10-inch Big Blue 1-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-20M-PL
Model Number:
HS-FIL-SED-BB-10-20M-PL
Ordering Code:
HSR-BS-SED-20MP

HS-FIL-SED-BB-10-20M-PL

10-inch Big Blue 20-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-50M-PL
Model Number:
HS-FIL-SED-BB-10-50M-PL
Ordering Code:
HSR-BS-SED-50MP

HS-FIL-SED-BB-10-50M-PL

10-inch Big Blue 50-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-1M
Model Number:
HS-FIL-SED-BB-10-1M
Ordering Code:
HSR-BS-SED-1M

HS-FIL-SED-BB-10-1M

10-inch 1-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-20M
Model Number:
HS-FIL-SED-BB-10-20M
Ordering Code:
HSR-BS-SED-20M

HS-FIL-SED-BB-10-20M

10-inch 20-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-5M
Model Number:
HS-FIL-SED-BB-10-5M
Ordering Code:
HSR-BS-SED-5M

HS-FIL-SED-BB-10-5M

10-inch 5-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 5 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-10-50M
Model Number:
HS-FIL-SED-BB-10-50M
Ordering Code:
HSR-BS-SED-50M

HS-FIL-SED-BB-10-50M

10-inch 50-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-20-1M
Model Number:
HS-FIL-SED-STD-20-1M
Ordering Code:
HSR-L-SED-1M

HS-FIL-SED-STD-20-1M

The 20-inch 1-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. It is a premium-quality, food-grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 20 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-20-1M-PL
Model Number:
HS-FIL-SED-STD-20-1M-PL
Ordering Code:
HSR-L-SED-1MP

HS-FIL-SED-STD-20-1M-PL

The 20-inch 1-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SD-STD-20-20M-PL
Model Number:
HS-FIL-SD-STD-20-20M-PL
Ordering Code:
HSR-L-SED-20MP

HS-FIL-SD-STD-20-20M-PL

The 20-inch 20-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-20-5M
Model Number:
HS-FIL-SED-STD-20-5M
Ordering Code:
HSR-L-SED-5M

HS-FIL-SED-STD-20-5M

The 20-inch 5-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. It is a premium-quality, food-grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 20 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-STD-20-5M-GR
Model Number:
HS-FIL-SED-STD-20-5M-GR
Ordering Code:
HSR-L-SED-5MG

HS-FIL-SED-STD-20-5M-GR

The 20-inch 5-micron grooved polypropylene sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housings to reduce capital equipment costs. Contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other standard sediment filters. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Grooved polypropylene filter for expanded filter capacity
  • 5 Microns filtration rating
  • Melt blown polypropylene
  • Fits all standard 20 inch housings
Photograph of HS-FIL-SED-STD-20-50M
Model Number:
HS-FIL-SED-STD-20-50M
Ordering Code:
HSR-L-SED-50M

HS-FIL-SED-STD-20-50M

The 20-inch 50-micron sediment depth cartridge is made of melt blown polypropylene material and has an excellent chemical resistance with no media migration. It is a premium-quality, food-grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. The filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • 20 Inch depth
  • Collects particles throughout the entire thickness of the filter
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SD-STD-20-50M-PL
Model Number:
HS-FIL-SD-STD-20-50M-PL
Ordering Code:
HSR-L-SED-50MP

HS-FIL-SD-STD-20-50M-PL

The 20-inch 50-micron pleated sediment filter features a greater surface area than a wound, spun or melt blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and contains no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the maintenance costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-1M-PLT
Model Number:
HS-FIL-SED-BB-20-1M-PLT
Ordering Code:
HSR-BL-SED-1MP

HS-FIL-SED-BB-20-1M-PLT

20-inch Big Blue 1-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-20M-PL
Model Number:
HS-FIL-SED-BB-20-20M-PL
Ordering Code:
HSR-BL-SED-20MP

HS-FIL-SED-BB-20-20M-PL

20-inch Big Blue 20-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-50M-PL
Model Number:
HS-FIL-SED-BB-20-50M-PL
Ordering Code:
HSR-BL-SED-50MP

HS-FIL-SED-BB-20-50M-PL

20-inch Big Blue 50-micron pleated sediment filter features a greater surface area than a wound, spun or melt-blown filter. Its lower pressure drop allows for increased flow rates and the use of a smaller filter housing to reduce capital equipment costs. The synthetic filter media is cellulose-free and includes no additives or binders which may cause foaming. The increased dirt holding capacity with longer life and fewer cartridge replacements reduces the filtration costs compared to other pleated cartridge suppliers. The thicker filter media has a greater capacity to capture and retain the particles compared to thin, more rigid media types which have less void space for particle retention. The temperature range is from 40 to 140 degrees F (4.4 to 60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Cellulose-free synthetic filter media
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-1M
Model Number:
HS-FIL-SED-BB-20-1M
Ordering Code:
HSR-BL-SED-1M

HS-FIL-SED-BB-20-1M

20-inch 1-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 1 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-20M
Model Number:
HS-FIL-SED-BB-20-20M
Ordering Code:
HSR-BL-SED-20M

HS-FIL-SED-BB-20-20M

20-inch 20-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 20 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-5M
Model Number:
HS-FIL-SED-BB-20-5M
Ordering Code:
HSR-BL-SED-5M

HS-FIL-SED-BB-20-5M

20-inch 5-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C) .

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 5 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F
Photograph of HS-FIL-SED-BB-20-50M
Model Number:
HS-FIL-SED-BB-20-50M
Ordering Code:
HSR-BL-SED-50M

HS-FIL-SED-BB-20-50M

20-inch 50-micron Full Flow (BB) 4 1/2-inch outside diameter sediment depth cartridge is made of melt-blown polypropylene material and has an excellent chemical resistance with no media migration. It is a high-quality food grade cartridge for food and beverage applications with a high dirt holding capacity. It is great for potable water, beverages, pre-filtration, fine chemicals, electronics, metal finishing, plating solutions and more. filter is rated for temperatures up to 140 degrees F (60 degrees C).

  • Removes rust, sand and particles without reducing or restricting the full flow of water
  • 50 Micron filtration rating
  • Melt blown polypropylene
  • Rated for temperatures up to 140 degrees F